AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Repair for Mesquite Homeowners
When the furnace quits on a cold January morning in Mesquite, the house goes cold fast and stays that way until someone qualified looks at it. We repair gas furnaces, heat pumps, and boilers for Mesquite homeowners, and our technicians have up to 8 years of experience working across the major brands. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday, with same-day service when the schedule allows. Call (866) 964-4152 for a free estimate. No manufacturer kickbacks, no brand bias. Just the right fix for your system.
Furnace Maintenance
Furnace Maintenance is the scheduled check that keeps a heating system running through the mild North Texas winter instead of failing in the middle of the first cold snap. You need it once a year, ideally before the first real cold front rolls through Mesquite, because that is when a small problem like a dirty flame sensor or a worn blower belt turns into a no-heat call. Whitman AC Repair inspects the burners, checks the heat exchanger, verifies the igniter and flame sensor, cleans the blower, and confirms the system is moving air the way it should. A typical furnace maintenance visit in Mesquite runs $80-$200, and the written estimate sets the final price. Our technicians are not paid on what they sell, so the report you get covers what we actually found.
What a Maintenance Visit Covers
We test the igniter, inspect the burners and flame sensor, check the heat exchanger for cracks, and measure airflow through the ductwork. Nothing gets skipped because it looks fine from the outside.
Why Annual Checks Matter in Mild Climates
Mesquite winters are short, which means a furnace can sit unused for months and dust, debris, and insect activity build up inside the cabinet. Starting it cold without a check is how a clogged burner or a stuck blower motor shows up on the coldest night of the year.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Heat Pump Repair
Heat Pump Repair covers the heating side of a system that also cools your home, and in Mesquite, a lot of homes run on exactly that setup. You need it when the heat pump blows cool air in heating mode, defrosts constantly, or never reaches the temperature on the thermostat. We diagnose the reversing valve, defrost board, refrigerant charge, and auxiliary heat strips, because a heat pump failure is rarely just one thing. Whitman AC Repair handles both heating and cooling under one roof, so you never have to source a separate contractor for the same piece of equipment. Typical heat pump repair in Mesquite runs $150-$700 depending on the part. The written estimate sets the final price, and it’s free.
Auxiliary Heat and Defrost Problems
When the auxiliary heat strips fail, the heat pump alone can’t keep up on a cold morning. When the defrost board sticks, ice builds on the outdoor coil and the system loses capacity. Both show up as the same symptom: the house never gets warm.
Reversing Valve Diagnosis
A stuck reversing valve can make a heat pump heat in summer and cool in winter. Testing it properly means checking pressures and temperature split in both modes, not just watching the thermostat.
Heating Repair
Heating Repair is the general fix for any heating system that isn’t doing its job, whether that’s a gas furnace, a heat pump, or an electric setup. You need it when the heat runs constantly, cycles short, makes new noises, or stops altogether. We start with a full diagnostic: thermostat calibration, airflow measurement, combustion analysis on gas units, and a visual inspection of the heat exchanger and venting. Whitman AC Repair services all major brands, including Carrier, Bryant, and American Standard, so we work on the equipment you already have instead of steering you toward a replacement. Typical heating repair in Mesquite runs $150-$700 depending on what’s failed. The estimate is free, the written estimate sets the final price, and our technicians are not paid on what they sell.
Diagnosing Short Cycling
Short cycling usually traces back to an oversized system, a failing limit switch, or a thermostat placed in the wrong spot. Finding the actual cause takes measurement, not guesswork.
Thermostat and Control Issues
A thermostat that reads the wrong temperature sends the whole system out of balance. We check calibration, wiring, and control board communication before assuming the furnace itself is the problem.
Boiler Repair
Boiler Repair covers the pressurized water and steam systems that heat some older Mesquite homes, and it’s a different trade from forced-air work. You need it when radiators stay cold at the top, the boiler short-cycles, pressure drops, or you hear banging in the pipes. We check the circulator pump, expansion tank, pressure relief valve, and the aquastat, then trace the water side to find where heat is getting lost. Boiler work falls within our $150-$700 typical repair range in Mesquite, and the written estimate sets the final price. If your boiler runs on gas, we treat the burner and venting side with the same care we give any gas appliance.
Pressure and Expansion Tank Checks
A failing expansion tank causes pressure swings that trip the relief valve or starve the system. Checking static pressure against the tank charge tells us quickly which one it is.
Circulator and Zone Valve Problems
When one zone stays cold while the rest of the house heats, the circulator or a zone valve is usually the culprit. We test flow and valve operation before recommending parts.
Gas Furnace Repair
Gas Furnace Repair is the service for the most common heating system in Mesquite, and it covers everything from a pilot that won’t light to a blower that runs but never heats. You need it when you smell gas, hear a clicking igniter with no flame, see a yellow instead of blue flame, or the furnace shuts off before reaching temperature. We test the gas valve, igniter, flame sensor, draft inducer, and pressure switches, and we check venting and combustion air. Typical gas furnace repair in Mesquite runs $150-$700 depending on the failed component, and the written estimate sets the final price. If you smell gas, leave the house and call your gas utility first. Our technicians have up to 8 years of experience, but gas is not a do-it-yourself job.
Igniter and Flame Sensor Failures
The igniter gets the burner lit and the flame sensor proves the flame is there. Either one failing gives you a furnace that tries to start and shuts off seconds later.
Venting and Combustion Air
A blocked flue or insufficient combustion air turns a small repair into a safety issue. We check the vent path and air supply as part of every gas furnace diagnostic.
Furnace Tune Up
Furnace Tune Up is the flat-price service that preps your furnace for the heating season, and the right time to book it is early fall, before the first cold front hits Mesquite. The visit includes burner cleaning, igniter and flame sensor inspection, blower and belt check, filter replacement guidance, and a combustion and airflow check. A furnace tune up in Mesquite runs $80-$200, and the written estimate sets the final price. Whitman AC Repair gives you a written report of what we actually found, and our technicians are not paid on what they sell. That means the report reflects the condition of your system, not a sales target.
What the Written Report Shows
The report lists each component we checked, its condition, and anything that needs attention soon. You get it in writing so you can plan instead of guessing.
Tune Up vs. Repair
A tune up keeps a healthy furnace healthy. A repair fixes something that has already failed. If we find a problem during a tune up, we quote the repair separately and let you decide.
Emergency Furnace Repair
Emergency Furnace Repair is for the calls where the heat is out and the house is getting cold, and it matters most when temperatures drop in Mesquite and a failed furnace becomes a real risk for kids and older adults. You need it when the furnace won’t ignite, trips the breaker repeatedly, or blows cold air with the thermostat calling for heat. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday, with same-day service when we can. A call outside dispatch hours is booked into the next opening. Typical emergency furnace repair in Mesquite runs $150-$700 depending on the failed part, and the written estimate sets the final price. Same-day work never costs more than the written estimate says.
What Happens When You Call
We answer 24/7 and book you into the earliest opening, Sunday through Friday, 7am to 7pm. You get the phone number, a time window, and a clear picture of what the visit covers before anyone arrives.
Safety First When the Heat Is Out
Never use an oven, a gas range, or a charcoal grill to heat a house. If you smell gas or see soot around the furnace, shut the system off, open a window, and call your gas utility before anything else.
Brands We Service
We service Carrier equipment and know where those units tend to wear out, from the igniter and flame sensor to the draft inducer motor. We also work on Bryant and American Standard systems, which share a lot of internal design with their sister brands, so diagnosing one feels a lot like diagnosing the others. Our technicians are certified to work on nine major HVAC brands, and that breadth means you won’t hear “we don’t service that brand” when you call for a furnace repair in Mesquite.
Daikin systems are another brand we handle regularly, and their variable-speed and modulating designs change how a furnace diagnostic runs compared to a single-stage unit. Because we service all the major manufacturers, repair and replacement advice is driven by your system’s condition, not by dealer incentives. Whether you have Carrier or any other make, we can help. One call covers your AC and your furnace.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- You smell gas. A rotten-egg smell near the furnace or in the house is a safety emergency. Leave the building and call your gas utility first, then call us once the house is clear.
- The furnace won’t light or keeps shutting off. A clicking igniter with no flame, or a furnace that starts and stops every few minutes, usually points to a failed igniter, flame sensor, or limit switch. Left alone, it can damage the heat exchanger.
- You see a yellow or orange flame. A healthy gas flame is blue. Yellow tips or soot around the burner mean the combustion is off and the system needs a trained technician, not a reset.
- The blower runs but the air is cold. Air moves, but the house won’t heat. That usually means the burner isn’t firing, the gas valve has failed, or a control board is not sending the signal.
- The breaker trips when the furnace starts. A furnace that trips the breaker repeatedly has an electrical fault that needs diagnosis before it becomes a fire risk. Shut it off at the breaker and call us.
Our Process, Step by Step
- 1
Call and book. Call (866) 964-4152. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday. We ask the basics: what the system is doing, how old it is, and whether you’ve noticed a smell or a sound.
- 2
On-site diagnostic. The technician checks the thermostat, airflow, combustion, and electrical side of the furnace. We use a multimeter to test the igniter, flame sensor, and control board, and a manometer on gas systems to check pressure.
- 3
Written estimate before work. We tell you what failed, what the repair costs, and what the options are. The price is set per job by the written estimate, and the estimate is free.
- 4
Repair or replace, honestly. If a repair makes sense, we quote it. If the furnace is near the end of its life, we say so and explain both paths. Because we work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, the recommendation follows your system’s condition, not a manufacturer partnership.
- 5
Verify and document. After the repair, we run the furnace through a full heating cycle, check the temperature rise, and confirm the fix. You get a record of what we did and what to watch for between seasons.
How Much Does Furnace Repair Cost in Mesquite?
A typical furnace repair in Mesquite runs $150-$700 depending on what has failed. An igniter or flame sensor replacement lands near the low end. A blower motor, inducer motor, or control board replacement moves toward the middle or top of the range. A cracked heat exchanger or a failed gas valve is usually at the top, and sometimes the right answer is a replacement rather than a repair. A furnace tune up runs $80-$200, and if you’re comparing a repair against a new system, Whitman AC Repair can price both paths for you side by side.
Several things affect where your estimate lands. The age and efficiency of the furnace matters, because older units can be harder to match parts for. Whether the problem is electrical, gas, or airflow changes the labor involved. And the location of the system plays a role. In Mesquite, a lot of furnaces sit in attics, closets, or garage spaces where access is tight, and that affects how long the job takes.
The best way to avoid overpaying is to get a written estimate before any work starts, and to know what that estimate includes. Ours covers the diagnostic, the parts, and the labor, with no manufacturer kickbacks and no brand bias. {Typical price is set per job by the written estimate, and the estimate itself is free. If a technician quotes you a fee before he’s looked at the furnace, ask what it covers.}
Our Service Area Near Mesquite
We serve Mesquite and the surrounding Metroplex, including Garland next door, Dallas to the west, and Richardson, Plano, Irving, Carrollton, Allen, Grand Prairie, and Coppell. Each of those cities is a short drive from Mesquite, so a same-day furnace repair is realistic when the schedule allows. We dispatch from 7am to 7pm, Sunday through Friday, and we answer 24/7. If you’re in Mesquite or a nearby city and your furnace is out, call us and we’ll give you an honest picture of when we can get there.
Serving Mesquite, TX – Our Local Coverage Area
We serve Mesquite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Furnace Repair in Mesquite
Furnace repair is the fix for any component in your heating system that has failed, from the igniter and flame sensor to the blower motor, gas valve, or control board. It covers gas furnaces, heat pumps, and boilers, and the goal is to get the system heating again safely rather than to sell you a new one. A technician diagnoses the actual failed part and quotes the repair. Call (866) 964-4152 for a free estimate.
Most furnace repairs take one to three hours once the technician has diagnosed the problem. Common jobs like an igniter or flame sensor replacement are quick, while a blower motor or control board take longer because of the access and testing involved. If the part has to be sourced, the timeline stretches a bit, and we tell you that up front. Call (866) 964-4152 and we’ll give you a realistic window.
Furnace repair in Mesquite typically runs $150-$700, depending on which part has failed and how accessible the system is. Minor repairs land near the low end and major components move toward the top. A tune up, if your system just needs maintenance rather than a repair, runs $80-$200. The written estimate sets the final price, and the estimate is free. Call (866) 964-4152 for an exact quote.
Yes, we service Carrier furnaces, along with Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We’re certified on all nine major brands, so you won’t hear “we don’t service that brand” when you call. Brand-agnostic experience means the diagnosis and recommendation follow your system’s condition. Call (866) 964-4152 to book a Carrier furnace repair in Mesquite.
We offer same-day service when the schedule allows, which is common for furnace repairs in Mesquite. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (866) 964-4152 and we’ll tell you the soonest we can be there.
Our repairs carry a warranty on the parts and the labor, and the details are spelled out on your written estimate before the work starts. Warranty terms vary by part and manufacturer, which is why we put it in writing rather than leaving it to a phone conversation. The written estimate sets the final price. Call (866) 964-4152 if you have a question about coverage on a repair we’ve already quoted.
Clear access to the furnace, and make a note of what the system is doing before the technician arrives. Write down whether it clicks but won’t light, how long it runs before it shuts off, and whether you’ve noticed a smell or an unusual sound. If you have the model and serial number, have it ready. And if you smell gas, leave the house and call your gas utility first. Then call (866) 964-4152.
Schedule Your Furnace Repair Service in Mesquite Today
If your furnace is out, call (866) 964-4152. We answer 24/7, offer fast dispatch from 7am to 7pm, Sunday through Friday, and provide a free, no-obligation estimate with the price set per job by the written estimate. Our technicians have up to 8 years of experience, and we service all the major brands, from Carrier to American Standard. Repair or replace – we’ll tell you honestly which one makes sense. Nine brands. One number to call.
Written by the team at Whitman AC Repair.