AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Irving
If you’re in Irving and your AC is on its last summer, you need a straight answer on what a new system costs and what your home actually needs. We handle AC installation across Irving, which means we’ve worked through the two very different housing types this city is known for: the older slab ranches and the tower condos of Las Colinas and Valley Ranch. Those are not the same job, and pricing them the same way is how homeowners end up overpaying or undersized. Call (866) 964-4152 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm.
Why Irving Homeowners Call Whitman AC Repair for AC Installation
We’re a multi-brand HVAC specialist, not a dealer locked into one manufacturer’s equipment. That matters in Irving, where a lot of homes run a Carrier or Bryant condenser that’s twelve or more years old and the honest answer is often a right-sized replacement from whichever brand fits the budget and the house.
Our technicians have up to 8 years of experience, and we’re certified to work on nine major brands. Ask us about Daikin, Bryant, American Standard, or Carrier and you won’t hear “we don’t service that.” We work on your brand, whatever it is. Recommendations follow your system’s condition, not a manufacturer partnership.
Response time to Irving is one reason homeowners keep our number. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. When a system fails during the DFW heat dome and temperatures are holding above 100°F for weeks, a stalled AC is a health problem for the very young and elderly, so the sooner someone qualified gets there the better. Estimates are free, and the written estimate sets the final price.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Central Air Conditioning Installation in Irving
Central Air Conditioning Installation in Irving looks different depending on which half of the city you live in, and knowing that up front saves homeowners from a bad changeout. On the older single-story ranches in 75061, the job is usually an attic-and-sideyard changeout: pull the tired condenser, match a correctly sized air handler, and deal with whatever the original ductwork is hiding. In Las Colinas and Valley Ranch towers, it’s a coordinated swap through a riser closet, and management has to schedule freight-elevator access. Typical central air installation in Irving runs $3,500 – $7,500, and the written estimate fixes the number.
Load Calculation Before Equipment Sizing
We start with a room-by-room load calculation, not a tonnage-for-tonnage swap. On Irving’s aging slab ranches, a 1970s low-pitch attic often hides original undersized ductwork, so a straight size match just reproduces the problem: high static pressure chokes airflow and the new evaporator coil ices. A qualified local pro measures static pressure and rebuilds duct runs before matching a condenser and air handler.
Duct and Airflow Check
Ductwork on these homes wasn’t sized for a modern system running at higher duty cycles. We check for crushed runs, undersized returns, and leaks before the new equipment goes in. Fixing static pressure first is what keeps a new install running at its rated efficiency.
Furnace Installation in Irving
Furnace Installation in Irving is often the second half of the same conversation, because a lot of these homes replace heating and cooling in one project. If you’re on natural gas, a standard furnace is the easy path. If your property is on the rural edge with no gas line, propane or a heat pump is the way in, and the electrical service has to be checked first. Both are covered by the same $3,500 – $7,500 range on the cold side of the project, and the free written estimate gives you the exact figure.
Propane and Heat-Pump Options Where Gas Isn’t Available
Where natural gas doesn’t reach, propane furnaces and cold-climate heat pumps are both workable. The deciding factor is your electrical panel and how well exposed linesets can be protected from a hard freeze. February 2021 showed what a deep freeze does to unprotected outdoor equipment in this part of Texas.
Freeze Protection for Exposed Linesets
The same climate that brings 100°F summers brings occasional hard freezes that split outdoor units and freeze exposed linesets. We plan lineset routing and protection as part of the install, not as an afterthought, so the system survives both extremes.
Trusted Brands We Service in Irving
We’re certified to work on nine major HVAC brands, including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That breadth is the point. When we recommend a replacement, it’s based on your home’s load, your electrical service, and your budget, not on what a dealership pays us to push. We don’t claim to keep parts on a truck, but we do keep the recommendation honest and the schedule moving. Whether your existing unit is a Bryant or an American Standard, we can service it or replace it.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in Irving Homes
- Tonnage swaps on 75061 ranches without a load calculation. Original undersized ducts stay in place, static pressure climbs, and the new evaporator coil ices. The equipment is fine; the sizing and ductwork weren’t.
- Oversizing on rural-edge properties with no wind shelter. Homes with no shade and open exposure get sized like suburban lots. Oversized equipment short-cycles and never holds a stable refrigerant charge.
- Propane and heat-pump conversions without an electrical check. A conversion planned before the panel and lineset freeze protection are confirmed runs into trouble on the first cold snap.
- Tower condo changeouts scheduled without building coordination. In Las Colinas and Valley Ranch, a fan-coil stack swap needs freight-elevator reservations and building management involved early, or the install stalls.
Pricing for AC Installation in Irving, TX
A typical AC installation in Irving runs between $3,500 and $7,500, and that range reflects the real spread in this city. A straightforward ranch changeout with sound ductwork sits near the bottom. A project that needs new duct runs, a heat-pump conversion, or a coordinated tower install pushes toward the top. What moves the number: equipment size and efficiency, ductwork repair, electrical service upgrades for a heat pump, and how much coordination the building requires. We give free estimates and put the price in writing so it’s fixed before work starts. Call (866) 964-4152 for an exact quote.
| Service | Typical Estimated Range |
|---|---|
| AC Installation | $3,500 – $7,500 |
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
We Also Serve Cities Near Irving
We handle AC installation across Irving and the surrounding communities, including Coppell, Carrollton, Dallas, and Grand Prairie. Same standards, same free written estimates, same brand-neutral recommendations wherever you are. If you’re just outside the Irving line and want to know whether we cover your address, call and ask. For a deeper look at how our AC installation service works, we’re glad to walk you through it.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About AC Installation in Irving
Yes. Propane furnaces and cold-climate heat pumps handle heating and cooling on a property without natural gas, and both fall inside the $3,500 – $7,500 range. We check your electrical service and lineset freeze protection first. Call (866) 964-4152 for a free estimate.
Because those low-pitch attics often hide original undersized ductwork, and a straight tonnage-for-tonnage swap leaves high static pressure that chokes airflow and ices the new coil. We measure static pressure and rebuild duct runs before sizing equipment. An exact quote takes about a visit – call us.
Through the riser closet and fan-coil stack, with the building’s management scheduling freight-elevator access, not through a backyard condenser pad. It takes coordination, and we plan it into the estimate. Call (866) 964-4152 so we can scope your building.
Yes. Exposed outbuildings with no wind shelter need their own load calculation, because sizing them like a shaded suburban lot leads to short-cycling and unstable refrigerant charge. We size standalone systems properly. Call for a free estimate.
Expect a system that meets current federal minimums for this region, and we’ll show you the efficiency step-ups and their cost difference in the written estimate. We don’t push equipment you don’t need. Call (866) 964-4152 for a free estimate.
Whether your Irving home sits on an aging slab ranch or inside a tower in Las Colinas, the right installation starts with a real load calculation and a straight recommendation. Call (866) 964-4152 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Whitman AC Repair.